Ip Multicast Routing Protocol; Igmp Interface Configuration - D-Link DGS-3324SRi User Manual

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Figure 4- 82. DNS Relay Static Table
To add an entry into the DNS Relay Static Table, simply enter a Domain Name with its corresponding IP
address and click Apply. A successful entry will be presented in the table below, as shown in the example above.
To erase an entry from the table, click the corresponding of the entry you wish to delete.

IP Multicast Routing Protocol

The functions supporting IP multicasting are added under the IP Multicast Routing Protocol folder, from the
Layer 3 IP Networking folder.
IGMP Snooping, DVMRP, and PIM-DM can be enabled or disabled on the Switch without changing the
individual protocol's configuration.

IGMP Interface Configuration

The Internet Group Multicasting Protocol (IGMP) can be configured on the Switch on a per-IP interface basis.
To view the IGMP Interface Table, open the IP Multicasting folder under Configuration and click IGMP
Interface Settings. Each IP interface configured on the Switch is displayed in the below IGMP Interface Table
dialog box. To configure IGMP for a particular interface, click the corresponding hyperlink for that IP interface.
This will open another IGMP Interface Configuration window:
Figure 4- 83. IGMP Interface Configuration Table
120