D-Link DRO-250i User Manual page 30

Introduction to DRO-250i
If the area code of user and the ISP is same, then enter zero in the area code
field.
Dial Prefix:
In Dial Prefix, user should enter the country code if the user is dialing to
other country, or else enter zero e.g. if user wants to dial to Singapore then
enter 0065 as dial prefix where 65 is country code of Singapore.
Phone Number:
Enter the phone number of the ISP, excluding the Area Code and Dial
Prefix.
Alternate Phone Number:
Enter the alternate phone number of the ISP, excluding the Area Code and
Dial Prefix. If primary phone number is busy then alternate phone number
will be dialed automatically.
User Name:
Enter the user name given by the ISP provider. It can be 20 characters
long.
Password:
Enter the password given by the ISP provider. It can be 20 characters
long.
Protocol Compression
This will enable or disable Protocol Compression field. This should be
same as ISP settings. Before enabling or disabling this field, verify ISP
settings and then select accordingly.
DRO-250i User Manual
29