Introduction to DRO-250i
3.2.5.4
WAN 4 - Modem Configuration
Modem configuration is used for storing basic modem command
information which is specific to a modem.
Click on Interfaces > WAN4 > Modem Configuration and opens up as
shown below:
Initialization String (0): String used to initialize the modem. It is specific
for a modem. The default value is "ATZ".
Initialization String (1): If modem has two initialization strings then
provide second one, otherwise leave it blank.
Init Response: Provide Init response string for modem, the default value
is "OK".
Dial String: Provide dial command for modem, the default value is
"ATDT".
Connect Response: Provide connect response string for modem, the
default value is "CONNECT".
DRO-250i User Manual
43