Interfaces -Wan3 - D-Link DRO-250i User Manual

Introduction to DRO-250i
3.2.4
INTERFACES –WAN3
Click on Interfaces > WAN3 and web page opens up as shown below:
WAN3 Settings
The WAN3 Settings menu allows you to view the current configuration
for your DRO-250i, and to choose the protocol by which your DRO-250i
will receive its WAN3 network settings
.
WAN3 Settings - Static IP address
Select this option to set static IP information. You will need to enter the IP
address, subnet mask and gateway address provided to you by your ISP.
The default gateway field specified here will be used by Load balancing feature
to route packets through this interface.
DRO-250i User Manual
35