Table of Contents
Advertisement
Introduction to DRO-250i
3.6.2 QOS - Filter Configuration
Click QoS > Filter Configuration to get the web page as shown below:
The filter by default supported is u32. Filters are attached to the root qdisc
or a class (parent parameter) to filter the packets that belongs to that
qdisc/class. If the packet matches a filter, it's placed in the class specified
with the flow Id parameter. Each packet that enters the root qdisc must end
in a leaf class to send.
Parent:
Parent ID of the filter is going to be the queue/class identified with the
number major:minor:Parent minor number will always be 0.
Prio:
This is the preference or priority of the filter being added. Prio determines
the order in which filter will be tried. Priority 1 will be the highest.
DRO-250i User Manual
99
Advertisement
Table of Contents
