Table of Contents
Advertisement
Introduction to DRO-250i
Interface Settings:
Configure interface specific RIP settings.
Interface Name:
Name of the interface for which RIP can be configured. Interface
WAN2(ISDN) can be configured as a single 64kbps, single 128kbps or
two 64kbps channels. In case of a single channel, only B1 will be
configurable by the user. In case of two channels, both B1 and B2 can be
configured.
Enable:
Enable or disable RIP on the particular interface.
Send Version:
The interface can use the global default RIP version to send RIP messages,
or be configured to use a specific RIP version.
Receive Version
The interface can use the global default RIP version to receive RIP
messages, or be configured to use a specific RIP version.
DRO-250i User Manual
51
Advertisement
Table of Contents
