3.4.8.2
Load Balancing-Weight Based
Click Advanced >Load balancing>Weight Based to get the web page as
shown below:
Load-balancing enables a user to distribute internet traffic among multiple
WAN interfaces. User can configure the percentage of traffic to be sent
through a WAN interface.
Load Balancing: Click on this check-box to enable/disable the load-
balancing feature.
Interface: WAN interfaces among which the load must be shared.
Status: Enable/Disable load-balancing on this interface.
Weight: Percentage of the load to be sent through this interface.
1.
Sum of weight of all enabled interfaces should be equal to 100.
.
2. Load Balancing will distribute traffic only via connected interfaces. So for Dial-
on-demand interfaces, Load Balancing will not work since the interface will never
get connected
Introduction to DRO-250i
DRO-250i User Manual
83