Figure 10: Setup Import Screen; Figure 11: Setup Export Screen; Figure 12: System Log Screen - Panasonic WJ-HL208A Operating Instructions Manual

Highlight "Include Network Setup" and press the
network settings will not be changed.
To export the current recorder settings, connect the USB device to the recorder. Highlight "Setup" – "Export..."
and press the button. Highlight the box beside "File name" and press the
allows you to enter the file name. Selecting "Export" will save the current settings in .dat file format on the
USB device.
Note: Even after changing the recorder settings by importing saved settings, the time-related settings
(Date/Time, Time Zone and Daylight Saving Time) will NOT be changed.
Important: The USB device must be FAT16 or FAT32 format.
Highlight "Show System Log..." and press the
The "System Log" screen lists system activities (up to 5,000 from the latest) that have occurred along with the
time and date. The
You can scroll through the log pages by using the Up and Down arrows, or you can go directly to a log page
by entering the log page number in the box at the bottom left of the screen. Highlight "Close" and press the
button to exit the screen.

Figure 10: Setup Import screen

Figure 11: Setup Export screen

Figure 12: System Log screen

icon will be displayed in the last column for system activities of the remote site.
button to toggle between On and Off. When set to Off, the
button to display the System Log.
button. A virtual keyboard
25