Table of Contents
Advertisement
< Set Preset >
Figure 72: PTZ Preset menu
While in the PTZ mode, pressing the [MENU] button and selecting " " (Advanced PTZ)
in the menu displaying at the top of the screen displays the Advanced PTZ menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera
manufacturer's instructions for the proper settings. Depending on the camera
specifi cations, some features may not be supported.
Note: The Pan/Tilt speed can be controlled by using the mouse. While in the PTZ
Figure 73: Advanced PTZ menu
You can use a mouse for convenient PTZ control. Click the left mouse button on the image and move that
image in the direction you want to by dragging the mouse. Use the mouse wheel to zoom in and out. Position
the mouse pointer at the bottom of the screen, and the following PTZ toolbar will display.
Figure 74: PTZ panel
Event Monitoring
When an event occurs, the recorder will display the camera associated with the event and the icon
displays on screen if "Event Monitoring On" is selected in the Display setup screen ("Main Monitor" tab).
How the cameras are displayed depends on the number of cameras associated with the event. If one camera
is associated with the event, the recorder will display the camera full screen. If two to four cameras are
associated with the event, the recorder will display the cameras on a 2x2 screen. If fi ve to nine cameras are
associated with the event, the recorder will display the cameras on a 1+5, 1+7 or 3x3 screen.
Event monitoring lasts for the dwell time set for event recording. After the dwell time has elapsed, the monitor
returns to the previous screen unless another event has occurred. If you want to return to the live monitoring
mode before the dwell time has elapsed, press the [MULTI SCREEN] button or one of the camera buttons.
< View Preset >
mode, clicking the left mouse button on the image and dragging the mouse
in the pan/tilt direction you want to move and then select the speed.
Clicking " " on the left side exits the toolbar. If you want to display the
toolbar again, position the mouse pointer at the bottom of the screen.
Change the toolbar location by clicking the empty space on the left side of
the toolbar and drag it to where you want it located on the screen. Use the
arrow buttons on the toolbar to pan or tilt the camera in the direction you
want. The other controls on the toolbar perform as described below:
Zoom Out/In
Iris Close/Open
Device Menu Set/Return
You can save camera position settings as "presets" so that
you can go directly to desired views.
Once you have the camera at the desired settings, press
the "PRESET SET" button, and the "Set Preset" dialog box
will appear. Select the number you want to assign to the
preset and press the
keyboard to enter the preset name.
Press the "PRESET VIEW" button to load the PTZ preset
and the "View Preset" dialog box will appear. Select the
desired preset and press the
(Play/Pause) button. Use the virtual
button to load the preset.
Focus Near/Far
Set/View Preset
59
Advertisement
Table of Contents
