Table of Contents
Advertisement
Note: Selecting "Narrow Bandwidth Mode" sets the Web Browser service to be enabled automatically
regardless of your Web Browser settings.
When using NAT (Network Address Translation) or firewall services, opening all UDP ports
allows you to access a recorder.
You can access a remote recorder and monitor live video images using media players,
supporting RTSP service. Start the media player on your local PC and enter
"rtsp://ID:Password@IP address:RTSP port number/trackID='channel number'", or start Internet
Explorer on your Blackberry or other mobile devices and enter "http://IP address:Web Browser
port number/".
Some media players might play video properly depending on network conditions.
RTSP service might not be supported, depending on the type of media player.
Web Browser
Highlight "Use Web Browser Service" and press the
Web Browser" for detailed descriptions of the Web Browser service.
Highlight the box beside "Port" and press the
Browser by using the Up and Down arrow buttons to increase or decrease the numbers.
48
Figure 54: Network – Web Browser setup screen
button. Set the port number used when accessing Web
button to toggle between On and Off. See "Appendix –
Advertisement
Table of Contents
