Record Table Search; Figure 84: Record Table Search Screen - Panasonic WJ-HL208A Operating Instructions Manual

Digital disk recorder

Hide thumbs

Table Of Contents

Table of Contents

Highlight the box beside "Check Time Overlap" and press the

will only be able to turn the "Check Time Overlap" on or off if a user-defined date and time is set to "From"

and "To". If the recorder's date and time have been reset, it is possible for the recorder to have more than one

overlapping start and stop time. When set to On, you will be asked to select one of the overlapping start and

stop time. When set to Off, the recorder will display search results from all start times to all stop times.

Highlight the box beside "Alarm-In" and press the

include in your search.

Highlight the box beside "Motion" and press the

any reports of motion.

Highlight the box beside "Video Loss" and press the

want any reports of lost video.

Highlight the box beside "Video Blind" and press the

want any reports of blind video.

Highlight the box beside "Text-In" and press the

any reports of text input.

Highlight the box beside "Record Channels" and press the

want to search for any reports of event recorded data. The recorder will display the events (not the camera

channels) that occurred and that also are recorded on the camera channel that you selected. If you do not

select a camera channel in this field, the recorder will search events that are not associated with cameras.

You can also toggle On and Off self-diagnostic System Events as part of your search. The choices are:

p p Panic Record

p p Check Recording

p p Check Alarm-In

p p Disk Almost Full

p p Disk Bad

p p Disk Temperature

p p Disk S.M.A.R.T.

p p Fan Error

p p Disk Config Change

Once you set your desired search conditions, highlight "Search" and press the

results in the "Event Log Search" screen. Selecting "Cancel" exits the screen without saving the changes.