Table of Contents
Advertisement
Search Menu
1 Search
p p Event Log Search: Selecting " " (Search) → "Event Log Search" selects video from the event log. See
the following "Event Log Search" section for details.
p p Record Table Search: Selecting " " (Search) → "Record Table Search" selects using a recording table.
See the following "Record Table Search" section for details.
p p Motion Search: Selecting " " (Search) → "Motion Search" selects motion events. See the following
"Motion Search" section for details.
p p Text-In Search: Selecting " " (Search) → "Text-In Search" selects text input strings. See the following
"Text-In Search" section for details.
2 Go To
p p Go to the First: Selecting " " (Go To) → "Go to the First" displays the first recorded image.
p p Go to the Last: Selecting " " (Go To) → "Go to the Last" displays the last recorded image.
p p Go to the Date/Time: Selecting " " (Go To) → "Go to the Date/Time" displays the Go to the Date/Time
screen.
Figure 81: Go to the Date/Time screen
Once you have set the date and time you want, press the
button. The selected date and time will display. (If no video was recorded during the selected time, a message
appears alerting you that no image was recorded at that time.) The
used to review the surrounding video.
3 Bookmark
Selecting "
" (Bookmark) in the Search menu adds the current playback point to the bookmark list. See the
following "Bookmarks" section for details.
4 Multi Screen
p p Full Screen: Selecting " " (Display) → "
displays the selected camera full screen. It is the same as pressing the individual camera buttons on the
front panel or clicking the left mouse button on a camera image when in one of the multiview formats (i.e.,
2x2, 1+5, 1+7 or 3x3). Clicking the left mouse button on the screen again returns to the previous display
mode.
p p 2x2, 1+5, 1+7, 3x3: Selecting " " (Display) → "
cameras in the selected multiview screen mode (2x2, 1+5, 1+7 or 3x3). Selecting each display mode is the
same as pressing the [MULTI SCREEN] button or scrolling the mouse wheel up and down when in one of
the multiview formats (i.e., 2x2, 1+5, 1+7 or 3x3).
p p Camera OSD, Status OSD: Selecting " " (Display) → "Camera OSD" or "Status OSD" toggles Camera
OSD or Status OSD On and Off.
5 Previous Group, 6 Next Group
Selecting " " or " " (Previous Group or Next Group) in the Search menu moves to the previous or next
page. It is the same as pressing the [NEXT GROUP] button.
7 Alarm
Selecting " " (Alarm) in the Search menu resets the recorder's outputs including the internal buzzer during
an alarm. It is the same as pressing the [ALARM] button.
Move the cursor over the date and time and press the
You can use the Left and Right arrow buttons to highlight the year, month, day,
hours, minutes and seconds. Use the Up and Down arrow buttons to change
to the date and time you want to search for video.
" (Full Screen) and choosing the camera number button
", "
button. Then highlight "Go" and press the
button and arrow buttons can now be
", "
" or "
" (2x2, 1+5, 1+7 or 3x3) displays the
(Play/Pause) button.
65
Advertisement
Table of Contents
