Table of Contents
Advertisement
Highlighting "Use Panic Recording" and pressing the
button toggles between On and Off.
Highlight the "Panic Recording" – "Duration" box and set the duration of panic recording. Panic recording
will stop automatically after the preset duration as long as the [PANIC] button is not pressed to stop the
panic recording. You can set the dwell from 5 minutes to 1 hour. Select "No Limit" if you want to stop panic
recording manually.
Highlighting the "Panic Recording" – "ips" and pressing the
button allows you to set the images per second
for Panic recording. You can select from "1.00 ips" to "25.00 ips".
Highlighting the "Panic Recording" – "Quality" and pressing the
button allows you to set the recorded
image quality for Panic recording. You can select from: "Very High", "High", "Standard" and "Basic".
Highlighting the "Panic Recording" – "Resolution" and pressing the
button allows you to set the recorded image
resolution for Panic recording. You can select from: "Very High" (D1), "High" (Half D1) and "Standard" (CIF).
Schedule
< Simple Mode >
< Advanced Mode >
Figure 27: Record – Schedule setup screen
You can program the recorder to record only during certain times based on time, day of the week, and
holidays. The smallest time segment you can use is 15 minutes.
Highlighting "Schedule On" and pressing the
button toggles between On and Off. In the Schedule On
mode, the recorder records video based on the schedule established in the Schedule screen. When turning
Schedule recording Off, you will be asked to confirm your decision, and " " displays at the top-left corner of
each camera screen. Panic recording will function even when Schedule is turned off. " " displays during panic
recording.
Highlight the "Schedule Mode" box and press the
button. You can select between "Simple Mode" and
"Advanced Mode". Selecting "Advanced Mode" allows you to set up individual recording schedule for each
event.
Note: Changing the schedule mode will reset all event and action statuses.
Highlight the "+" and press the
button to add a schedule item.
Highlight the box under the "Day" heading and press the
button to change the days that the scheduled
recording will take place. Choose from: "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat", "M~F", "Hol" and "All".
""""""
Highlight the box under the "Range" heading and press the
button to change the time range that the
scheduled recording will take place. The smallest time segment you can use is 15 minutes.
Highlight the box under the "Mode" heading and press the
button to change the recording mode that will be
used. Choose from: "No Record", "Time", "Event" and "Time & Event". (Simple Mode Only)
When the recorder is in the "No Record" mode, it will not record during the preset day and time range as long
as the [PANIC] button is not pressed. Use the "No Record" mode when you do NOT want the recorder to
record during certain times.
33
Advertisement
Table of Contents
