Table of Contents
Advertisement
Highlight the box beside "From" and press the
can enter a specific Date and Time. When set to On, the search will be from the first recorded image. When
highlighting "
" and pressing the
will be the starting date and time.
Highlight the box beside "To" and press the
enter a specific Date and Time. When set to On, the search will be from the last recorded image. When
highlighting "
" and pressing the
will be the ending date and time.
Highlight the box beside "Type" and press the
"Museum Search". "Motion Search" detects motion in the defined area. "Museum Search" detects if a defined
object has moved.
Highlight the box beside "Zone" and press the
You can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion.
Note: Defining the area of the image in which you want to search for motion is nearly identical to
setting up the recorder for "Motion". Please refer to "Motion Screen" in "Chapter 3 —
Configuration" for more detailed instructions on setting up the detection blocks.
When setting the "Museum Search Zone", the zone should be placed inside of the border line
of the target object. If the selected block is placed on the border line, the sensitivity of the
"Museum Search" may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside "Sensitivity" and press the
sensitivity) to "255" (high sensitivity).
Highlight the box beside "Min. Blocks" and press the
blocks that must be activated.
Once you set your desired search conditions, highlight "Search" and press the
results in the "Motion Search" screen. Selecting "Cancel" exits the screen without saving the changes.
When you search for motion events of another camera, you will be asked whether or not you want to delete
the previous search results from the list.
Text-In Search
The recorder maintains a log of each time there is Text Input. The "Text-In Search" screen displays this list.
Use the arrow buttons to highlight the event for which you would like to see video.
button to toggle between On and Off. When set to Off, you
button the bookmark list displays and the bookmark point you selected
button to toggle between On and Off. When set to Off, you can
button the bookmark list displays and the bookmark point you selected
button. You can select between "Motion Search" and
button. An image from the video appears with a grid overlaid.
button. You will be able to select from "1" (low
button. You will be able to set the number of sensor
Figure 89: Text-In Search screen
button to display the search
71
Advertisement
Table of Contents
