Panasonic WJ-HL208A Operating Instructions Manual page 85

Problem
The USB flash drive is not
recognized.
The Clip Player icon
displayed correctly.
A correct model number is not
displayed in Web Browser.
When accessing the Web Browser,
the following message is displayed
on the information bar.
"Pop-up blocked. To see this pop-up
or additional options, click here..."
Inspect the power cord, power plug and connectors periodically.
Problem
The power cord insulation is
damaged.
The power cord, plug and
connectors get hot during use.
The power cord gets hot when bent
or stretched.
Check if the port is not dusty. Clean the port properly
when gathering dust in the port.
When the data size is large, the icon might not be
is not
correctly displayed by limiting OS of PC that you are
using.
Your PC might not be connected to the recorder.
p p Is the Ethernet cable firmly connected to the
Network Port?
Ú Confirm the cable is firmly connected.
¼
p p Are you inputting correct Port Number on the Login
screen?
Ú Check the settings of the Port Numbers.
¼
Click the information bar and select "Always Allow
Pop-ups from This Site". The dialog window saying
"Allow pop-ups from this site?" will be displayed. Click
the [Yes] button.
The power cord, plug and connectors are worn out.
This may result in electric shock or a fire. Unplug the
power plug from the AC outlet immediately, and refer
to qualified service personnel.
Possible Solution
Possible Solution
Ref. Page
20
—
18, 45
—
Ref. Page
18
85