Periodic Maintenance Check List - Panasonic UF-585 Service Manual

3.3

Periodic Maintenance Check List

The chart outlined below is a general guideline for maintenance. The example list is for an average usage of 50 transmitted and
received documents per day. Needless to say, the environmental conditions and actual use will vary these factors.
The chart below is for reference only.
Printer Motor (626)
Toner Cartridge
Paper Feed Roller (518)(911) 12 months or 10,000 documents
Feed Roller (526) (904)
Receiver Unit
Bias Transfer Roller (604)
Fuser Unit (701)
Fuser Roller (709)
Pressure Roller (706)
Roller Shaft 2 (235)
Feed Pinch Roller (236)
* Shaft Hole
ADF Roller (331)
Separation Rubber (207)
Feed Roller (302)
Transmitter Unit
Eject Roller (303)
Scanning Glass (308)
Mirrors (334, 335, 336)
Transmit Motor (324)
"x" Stamp Head (325)
Note:
The number of pages is based on the ITU-T Image No. 1 test chart at Multi-Copy mode.
Operation environment 20
Parts Description
-
-
12 months or 10,000 documents
12 months or 10,000 documents
When replacing Print Cartridge
When the Recording Paper wraps
itself around the roller.
When the Recording Paper wraps
itself around the roller.
30,000 documents
30,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
12 months or 10,000 documents
-
-
°C,
50%RH.
Cleaning
Cycle Method
-
Page 31
Page 41
Page 44
Cleaning chart 50,000 documents
Page 36
Page 36
Page 22
Page 22
Page 28
Page 22
Page 29
Page 26
Page 24
Page 27
50
Replacement / Adjustment
Cycle Method
100,000 documents Page 33
approx.7,500 pages
(See Note)
30,000 documents Page 31
-
30,000 documents Page 44
Page 35
(Included as part of Page 37
the Fuser Unit)
(Included as part of Page 37
the Fuser Unit)
-
-
30,000 documents Page 25
30,000 documents Page 22
30,000 documents Page 29
30,000 documents Page 26
-
-
100,000 documents Page 27
5,000 documents Page 25