2.20 Bias Transfer Roller (604)
(2)
(3)
White
(4)
(1) Remove the CCD Shield Plate (Refer to 2.19).
(2) 2 Screws (19).
(3) Remove the BTR Guide (602).
(4) Release the Latch Hook on the Transfer Guide (601)
Black
Assembly as illustrated and remove the Bias Transfer
Roller (604).
Caution:
• Do not touch the surface of the Bias Transfer Roller. Clean
the Bias Transfer Roller only with a dry cloth.
• When cleanning or replacing the Bias Transfer Roller,
clean both sides of the Transfer Guide with isopropyl alco-
hol.
45