2.14 LCU PC Board (402), Low Voltage Power Supply Unit (423)
(3)
(10)
(9)
(6)
(7)
(5)
(11)
(13)
(14)x4
(15)
(2)
(2)
(2)
(2)
(4)
(4)
(4)
(4)
(8)
(12)
(13)
(1) Remove the Rear Cover (105) (Refer to 2.13).
(2) Remove the Flat Cable from the Connector CN25 on the
LCU PC Board.
(3) 3 Screws (B5).
(4) Remove the LCU PC Board (402).
(5) 1 Screw (B1).
(6) Remove the Parallel Port I/F Cover (113).
(7) 1 Screw (19).
(8) Remove the Right Printer I/F Bracket (406).
(9) 1 Screw (19).
(10) Remove the Left Printer I/F Bracket (405).
(11) 3 Screws (19).
(12) Remove the LVPS Protection Cover (404).
(13) Disconnect Connectors CN31 and CN33 on the LVPS Unit.
(14) 4 Screws (19).
(15) Remove the LVPS Unit (423).
35