2.10 A4 LED Array (329), Feed Roller (302)
(2)
(4)
(7)
(10)
(3)
(5)
(6)
(9)
(1) Remove the Scanner Block (321) (Refer to 2.9).
(2) Remove the Ground Plate (317).
(3) 3 Screws (19).
(4) Release the Harness from the hook.
(5) Remove the LED Bracket (306) Assembly.
(6) Remove 3 LED Clips (307).
(7) Remove the A4 LED Array (329).
Caution:
When reinstalling the A4 LED Array, position the 3 LED Clips
at the appropriate locations.
(8) Remove the Gears, Bushings and the Roller Wire Spring
(Refer to 2.7).
(9) Remove 2 P6A Bushings (316).
(10) Remove the Feed Roller (302).
30