Panasonic UF-585 Service Manual page 6

12. Deferred Communication
The 10 built-in 24-hour timers allow the operator to set deferred transmissions or deferred polling. Using the document
memory, documents can also be transmitted to multiple stations.
13. Substitute Reception
The contents of a document will be received into the document memory if the recording paper or toner runs out, or a recording
paper jam occurs during reception. The stored documents can be printed after replacing the recording paper or toner cartridge
or correcting a paper jam.
14. Multiple Task Operation
Multiple Task Access operations can store documents and their destinations even during reception or memory transmission. It
can also receive during document storage.
15. Halftone (Photo)
For transmission or copying, this function ensures high quality reproduction of gray-shaded or photographic documents. This
machine uses 64 levels of error diffusion to create halftones with Quality mode.
16. Copy Function
The Copy function allows the machine to be used as a copier. Using the document memory, up to 99 copies can be made of a
single original.
17. 32 Transaction Journal
The 32 Transaction Journal provides transaction information - number of pages transmitted or received, start date and time,
communication results, identification, etc. It is automatically printed after every 32 transactions, or it can be printed manually
at anytime.
18. Latest Individual Transmission Journal
The latest Individual Transmission Journal provides information on the last transmission - number of pages transmitted, start
date and time, communication results, identification, etc. It can be printed manually at anytime after communications.
19. Communication Journal
A communication journal is a result report of a communication which can be printed automatically after communication is
completed. Printout conditions can be selected for each communication to 1) not print, 2) always print, or 3) print when
communication has failed.
20. Multi-purpose LCD Display
The 20 x 2 Alphanumeric LCD display shows the operation mode, date and time, remote ID number, and pages transmitted or
received. In case of an error, the LCD display shows an information code and error message indicating the exact cause of
trouble.
21. Verification Stamp
The Verification Stamp is automatically stamped on the original document when the document is transmitted or stored in
memory successfully. The "X" mark appears at the bottom of each page.
22. Password Transmission
A password transmitted from the other party is checked to prevent the transmission of documents to an unauthorized station.
23. Password Reception
A password transmitted from the other party is checked to prevent the reception of documents by an unauthorized station.
The reception of a junk mail, etc., is preventable.
24. Access Code
The Access Code can be registered into the machine to prevent operation by an unauthorized user.
25. Selective Reception
To prevent unwanted faxes from being received, the machine compares the ID Number of the transmitting machine with the
telephone number stored in the built-in automatic telephone dialer.
6