2.7
Eject Roller (303)
(3)
(8)
(3)
(4)
(5)
(7)
(6)
(9)
Roller Spring
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.5).
(2) Remove the Stamp Assembly (325, 326) (Refer to 2.6).
(3) Release 2 Latch Hooks.
(4) Remove the Ground Plate (317).
(5) Release the Latch Hook by using a small Blade-tip
Screwdriver.
(6) Remove 2 D25F Drive Gears (332).
(7) Remove D17 Gear (313) and D50 Gear (314).
(8) Remove 2 P6C Bushings (342).
(9) Remove the Roller Wire Spring (343).
Caution:
Reinstall the Roller Wire Spring (343) according to the
illustration.
26