Panasonic UF-585 Service Manual page 97

4.3.2 Information Codes: 401, 402, 422
401
START
Is the ID Number programmed
into your machine?
Yes
Is the Receiving unit set up for
Selective Receive?
No
Is the Receiving unit set up for
Password Reception?
No
Are you sending a Confidential
Mail?
No
Are you sending a document
by Relayed Transmission?
No
END
402, 422
Is Communication with the
reference unit successful?
Check the remote unit in question.
(Remote unit is defective)
No
Program the ID Number.
Yes
Check the Selective Receive
settings at the receiving unit.
Yes
Program the Receive Password
to match the receiving unit.
(Fax Parameter No. 44)
Yes
Check with the receiving end,
the mailboxes may be full.
Yes
Check the Relayed Transmission
settings at the Relay Station.
97
START
No
Yes
Replace the SCA/SCB PCB.
END