Panasonic UF-585 Service Manual page 148

No. Parameter (see Note 3)
134 COLLATION (PC)
135 Not used
~
199
Note 1:
No. 070 LINE ERROR-Transmit condition of RTP/PIP or RTN/PIN
Signal
1:128
MCF/PIP 0-31
RTP/PIP 32-63
RTN/PIN 64-127
Note 2:
No. 071 TOTAL ERROR-Transmit condition of RTP/PIP or RTN/PIN
Signal
1:5%
MCF/PIP 0-2
RTP/PIP 3-4
RTN/PIN 5-
Note 3:
The default setting of parameters depends on the country's specifications or regulations. Print the Function Parameter List to
confirm the default settings.
Note 4:
Continuous Polling (Station Mode)
This feature allows you to store or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station". The Program Key [P4] will be
assigned with the "Store-4-Polling" name automatically and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF and then press the Program Key [P4] to
store or add the document(s) into a polled file.
(Note: If a regular polled file ([FUNCTION][3][2]) is stored in memory, the Program Key [P4] for Continuous Polling will not be
accepted.)
Function Parameter Table
Selections
1 = Off
2 = On
3 = Auto
Setting
2:256 3:512
0-63 0-127
64-127 128-255
128-255 256-511
Setting
2:10% 3:15%
0-4 0-7
5-9 8-14
10- 15-
Selects the Print Collation in PC Interface Mode.
When "Auto" is selected, print collation will operate
according to the setting in Fax Parameter #65.
4:1024 5:2048
0-255 0-511
256-511 512-1023
512-1023 1024-2047
4:20%
0-9
10-19
20-
148
Function
6:Off
Always
-
-