2.12 High Voltage Power Supply Unit (424), Paper Feed Solenoid (531),
Clutch Gear Assembly (530), Paper Feed Roller (518)
(4)
(2)
(6)
(11)
(10)
(9)
(8)
(3)x5
(5)
(7)
(13)
(14)
(1) Remove the Right Cover (102) (Refer to 2.3).
(2) Remove the HVPS Sheet (408).
(3) 4 Screws (19).
(4) Disconnect Connector CN39 on the the HVPS Unit.
(5) Remove the HVPS Unit (424).
(6) 1 Screw (19).
(7) Remove the Paper Feed Solenoid (531).
Note:
If the Paper Feed Solenoid does not work properly due to
dust, etc. remove the spring to disassemble and clean the
magnet and plate as shown in the illustration.
(8) 1 Screw (19).
(9) Remove the Feed Roller Ground Spring (628).
(10) Remove the E-Ring (524).
(11) Remove the Clutch Gear Assembly.
(12) Place the machine on its Rear side.
(13) 2 Screws (19).
(14) Remove the Feed Roller Assembly.
32