Fuser Lamp (732), Exit Roller; Pressure Roller (706); Fuser Roller (709 Pressure Roller (706) - Panasonic UF-585 Service Manual

2.16 Fuser Lamp (732), Exit Roller (719), Fuser Roller (709),

Pressure Roller (706)

(2)
Black
(9)
(4)
(3)
(7)
White
(5)
(8)
(1) Remove the Rear Cover (Refer to 2.13) and the Fuser Unit
(Refer to 2.15).
(2) 1 Screw (4N).
(3) Remove the LVPS-Fuser Harness (727) and Fuser Lamp
Terminal B (731).
(4) Remove the Fuser Lamp (732).
Caution:
When reinstalling the Fuser Lamp, make sure that the Fuser
Lamp is inserted into the Fuser Unit as illustrated. Do not
touch the glass portion of the Fuser Lamp with bare hands.
Grease from fingerprints will shorten its life cycle, use isopro-
pyl alcohol to clean fingerprints.
Caution:
When reinstalling the Fuser Lamp, make sure that both ends
of the Fuser Lamp fits into the projected area of the Fuser
Lamp Terminal A (724) and the Fuser Lamp Terminal B
(731).
(5) Remove the E22 Gear (722).
(6)
Caution:
You may need to use force to pull out the Gear.
(6) Remove the Right and Left P3.5L11.2 Bushings (720 and
721).
(7) Remove the Exit Roller (719).
(8) 2 Screws (4N).
(9) Remove the Fuser Cover (723).
37