Service Mode 1 (Function Parameter Setting) - Panasonic UF-585 Service Manual

5.2

Service Mode 1 (Function Parameter Setting)

Use the following procedure to change the function parameters.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "1".
5 Enter the Function Parameter Number.
Ex: Changing the "ALARM STATUS" -- Enter "001" and press [SET].
6 Press "START".
7 Enter the new setting value.
Ex: Enter "3" for Constant.
8 Press "START". The new value will be stored and the next parameter will be
displayed.
9 Repeat steps 4 through 7 to change other Function Parameters or Press
"STOP" twice to return to standby.
Note
The following buttons provide these functions in the service mode:
"START" : The new setting value is stored in the machine.
"\/" : Scroll the function parameter number down.
"/\" : Scroll the function parameter number up.
Operation or Unit Condition
143
LCD Display
MAR-12-1999 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
PARAMETER (000-199)
ENTER PARAMETER #_
PARAMETER #001
ALARM STATUS?
ALARM STATUS:Timer
1:OFF 2:Tmr 3:CONST
ALARM STATUS:Const.
1:OFF 2:Tmr 3:CONST
PARAMETER #002
STOP COMM.JRNL?
MAR-12-1999 15:00
00%