Panasonic UF-585 Service Manual page 262

No. Parameter
18 OP CALL TIMER
19 OGM LENGTH (TAM I/F)
20 SILENT DETECTION
(TAM I/F)
22 SUBSTITUTE RCV
23 RECORDING PAPER
SIZE
24 PRINT REDUCTION
25 REDUCTION RATIO
26 POLLING PASSWORD
27 POLLED FILE SAVE
28 STAMP AT MEM. XMT
30 DRD SERVICE
31 INCOMPLETE FILE
SAVE
32 COPY REDUCTION
Continued on the next page.
Setting
Setting
Number
Selecting the length of time that your machine signals (rings) for an
1 20 sec.
incoming voice call in Fax/Tel Auto Switching mode.
2 30 sec.
3 40 sec.
4 50 sec.
1 1 sec. Setting the OGM length of your TAM from 1 to 60 second. Unit will
not start to detect SILENT after detecting a call in TAM Interface
--- ---
mode until the time lapse.
(Default = 20 sec.)
60 60 sec.
Selecting the Silent Detection Mode.
1 Invalid
2 Valid
Selecting whether the machine receives to memory when
1 Invalid
recording paper runs out, toner runs out or recording paper is
2
jammed.
Valid
Setting the recording paper size installed in your machine.
1 A4
2 Letter
3 Legal
Selecting print reduction mode.
1 Fixed
Fixed : Reduce received document according to setting of
Auto : Reduce received document according to the length of
2 Auto
70 70% Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is selected on
---- ----
Fax Parameter No. 24.
100 100%
(----) Setting a 4-digit password for secured polling.
1 Invalid Selecting whether the machine retains the polled document in
memory even after the document is polled once.
2 Valid
Selecting whether the machine stamps the original documents
1 Invalid
when storing the documents into memory.
2 Valid (depending on the Stamp setting on the Control Panel)
Selecting whether or not the machine is available "DRD Service".
1 Invalid
If this parameter is set to "Valid", your machine detects the
2 Valid
specified ring pattern only to receive a document automatically.
1 Invalid Selecting whether the machine retains the document in memory if
the document is not successfully transmitted.
2 Valid
Selecting whether the machine performs the copy reduction ratio
1 Manual
automatically or manually.
Manual :The machine will prompt you for the Zoom ratio (100% to
Auto :
2 Auto
262
Comments
Parameter No. 25.
received documents.
70%) when making copies.
The machine will automatically determine the reduction
ratio according to the length of the original document.