Periodic Maintenance Check List - Panasonic DX-2000 Service Manual

3.3.

Periodic Maintenance Check List

The chart outlined below is a general guideline for maintenance. The example list is for an average usage of 50 transmitted and
received documents per day. Needless to say, the environmental conditions and actual use will vary these factors.
The chart below is for reference only.
Transmitting mechanism parts
ADF Roller (323)
Separation Rubber (229)
Pre-Feed Roller (325)
Mirrors (337 and 338)
Verification Stamp (336)
Feed Roller (328)
Transmit Motor (346)
Eject Roller (330)
Latch (302)
Toner Cartridge
Feed Roller (618)
Clutch Gear Assembly (660)
Paper Feed Solenoid (744)
Bias Transfer Roller (630)
Fuser Unit (431)
Paper Feed Roller (746)
Fuser Lamp (408)
Fuser Roller (414)
Pressure Roller (409)
Fan Unit (622)
Printer Motor (650)
Note: The number of pages is based on the ITU-T Image No. 1 test chart at Standard resolution and Multi-Copy mode.
Cleaning
Cycle
3 months Page 31
3 months Page 25
3 months Page 31
12 months Page 32
- -
3 months Page 31
- -
3 months Page 31
12 months -
- -
12 months or 10,000 Alcohol
documents
12 months or 10,000 Alcohol
documents
12 months or 10,000 Alcohol
documents
12 months or 10,000 -
documents
When replacing Print Cleaning chart 50,000 documents
Cartridge
12 months or 10,000 Alcohol
documents
- -
12 months or 10,000 Alcohol
documents
12 months or 10,000 Alcohol
documents
- -
- -
51
Replacement / Adjustment
Method Cycle
3-5 years(30,000 documents) Page 34
1-3 years(10,000 documents) Page 25
3-5 years(30,000 documents) Page 34
-
5,000 documents
3-5 years(30,000 documents) Page 34
5 years
3-5 years(30,000 documents) Page 34
-
10,000 pages (See Note)
-
-
-
30,000 documents
30,000 documents
50,000 documents or 2-5
years
-
-
3-5 years
5 years
Method
-
Page 32
Page 34
-
-
Page 45
Page 45
Page 45
Page 37
Page 39
Page 45
Page 39
Page 41
Page 41
Page 45
Page 43