Feed Roller (349), Eject Roller (354), Adf Transmit Motor (357), Adf Roller (335), Pre-Feed Roller (327), Clutch Spring Assembly; Pre-Feed Roller (327), Clutch Spring Assembly (363) - Panasonic DF-1100 Service Manual

2.6 Feed Roller (349), Eject Roller (354), ADF Transmit Motor (357), ADF Roller (335),
Pre–Feed Roller (327), Clutch Spring Assembly (363)
(3)
(2)
(7)
(8)x7
(10)
(1) Remove the Rear Cover (Refer to 2.3).
(2) Three Screws (19).
(3) Disconnect the Ground Strap .
(4) Disconnect Connector CN75 on the CONA PC Board.
(5) Open the Platen Cover (301) and remove it.
(5)
(6) Open the ADF Door .
(7) Remove the ADF Cover (310).
(8) Seven Screws (B1).
(9) Remove the Blind Front Cover (309).
(10) Remove the Blind Back Cover (308).
(9)
Disassembly Instruction
2–9