Test Mode 1 (Function Parameter Setting) - Panasonic DF-1100 Service Manual

Panasonic DF–1100
5.3

Test Mode 1 (Function Parameter Setting)

Use the following procedure to change the function parameters.
Step
FAX
1
Make sure that the FAX lamp is on.
If not, press FAX to set the " FAX Mode ".
2 Press " FUNCTION " and then " 7 ".
3 Press " MONITOR " four times, then press " * ".
4 Press " 1 " and " START ".
Enter the Function Parameter Number.
5
Ex: Changing " ALARM STATUS " -Enter " 01 ".
6 Press " START ".
Enter the new setting value.
7
Ex: Enter " 2 " for Constant.
Press " START ". The new value will be stored and the
8
next parameter will be displayed.
Repeat steps 5 through 8 to change other Function
9
Parameters or Press " STOP " twice to return to standby.
Note: The following buttons provide these functions in the test mode:
" START " : The new setting value is stored in the machine.
" " : Scroll the function parameter number down.
" " : Scroll the function parameter number up.
5–4
Operation or Unit Condition LCD Display
12-JUN-1998 15:00
00%
SET MODE (1-6)
ENTER NO. OR
TEST MODE
NO.=_ (ENTER 0-13)
TEST MODE (00-99)
ENTER TEST MODE #_
TEST MODE #01
ALARM STATUS ?
ALARM STATUS:Timer
1:Timer 2:Constant
ALARM STATUS:Const.
1:Timer 2:Constant
TEST MODE #02
STOP COMM.JRNL ?
12-JUN-1998 15:00
00%