Gear Lock
2
Press in and rotate Retain-
ing Clip to DOWN position
Figure 7 Removing the Developer Module
14. (
Figure 8
): Remove the Developer Module.
General Procedures
Installation Procedure
1
Slide gear to left and lock
into position with Gear Lock
15. (
01/02
6-32
Remove the Developer Module and
place upon a flat surface
Figure 8 Preparing to Remove the Developer Module
Figure
9): Remove the Sump Shield.
1
Disconnect A22
2
Press in and rotate the
Developer Module Retain-
ing Clip to the DOWN posi-
tion
8825/8830 Printer