REP 7.9 Roll Drive Motor
Parts List on
PL 7.2
Switch off the Main Power Switch. Disconnect the Power Cord.
Removal
1.
Loosen the screws and open the Rear Door.
1
Disconnect P/J 2
3.
(Figure
2): Remove the bracket from the Roll Drive Motor.
8825/8830 Printer
WARNING
2
Remove the spring
3
Loosen the screws
Figure 1 Removing the Roll Drive Assembly
2.
(Figure
1): Remove the Roll Drive Motor Assembly.
6
Remove the Roll Drive
Motor Assembly
5
Remove the screws (2)
4
Move the bracket and disconnect the chain
from the drive sprocket
01/02
4-15
Repairs and Adjustments
REP 7.9