4.
(Figure
3): Reinstall the Top Shield, taking care not to overtighten the screws.
4
Connect M1
2
Reinstall the
screws (2)
Figure 3 Reinstalling the Top shield
5.
Reinstall the Developer Module
(REP
Repairs and Adjustments
REP 9.12, REP 9.13
3
Tighten the screws (2)
1
Reinstall the Top Shield
9.5).
REP 9.13 Sump Shield
Parts List on
PL 9.9
Switch off the Main Power Switch. Disconnect the Power Cord.
NOTE: The art used for this procedure was developed for previous products and may not
match the 8825/8830 configuration exactly.
Removal
1.
Remove the Developer Module
01/02
4-72
WARNING
(REP
9.5).
8825/8830 Printer