KYMCO ZX Service Manual page 9

2
. GENERAL INFORMATION
n Wire harnesses routed along with handlebar
should not be pulled tight, have excessive
slack or interfere with adjacent or surrounding
parts in all steering positions.
n When a testing device is used, make sure to
understand the operating methods thoroughly
and operate according to the operating
instructions.
n Be careful not to drop any parts.
n When rust is found on a terminal, remove the
rust with sand paper or equivalent before
connecting.
n Symbols:
2-5
Remove the rest
The following symbols represent the servicing
methods and cautions included in this service
manual.
: Apply engine oil to the
specified points. (Use
designated engine oil for
lubrication.)
Engine Oil
: Apply grease for lubrication.
Grease
: Use special tool.
Special
*
: Caution
: Warning
( ð 12-3)
: Refer to page 12-3.
ZX / SCOUT