KYMCO ZX Service Manual page 90

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
CLUTCH/DRIVEN PULLEY
INSTALLATION
Install the drive belt on the clutch/driven pulley
and then install the clutch/driven pulley onto the
drive shaft.
Install the clutch outer.
Hold the clutch outer with the universal holder.
Install and tighten the 10mm clutch outer nut.
Torque: 3.5 4.5kg-m
Install the left crankcase cover. ( ð 8-6)
8-17
ZX / SCOUT
Clutch/Driven Pulley
Clutch Outer
Universal Holder