KYMCO ZX Service Manual page 96

9
. FINAL REDUCTION
Case Cover)
Remove the transmission case cover bearings
using the bearing remover.
Remove the final shaft oil seal.
Drive new bearings into the transmission case
cover.
BEARING REPLACEMENT (Left
Crankcase Cover)
Remove the drive shaft.
Remove the drive shaft oil seal.
Remove the left crankcase bearings using the
bearing remover.
Drive Shaft Bearing
9-5
Bearing Outer Driver Handle A
Bearing Outer Driver, 32x35mm
Bearing Remover Set, 12mm
Drive new bearings into the left crankcase.
ZX / SCOUT
Bearing Remover Set