Fuel Unit - KYMCO ZX Service Manual

16
. INSTRUMENT/SWITCHES/LIGHTS

FUEL UNIT

REMOVAL
Remove the frame body cover. ( ð 12-5)
Disconnect the fuel unit wire connectors. Turn
the fuel unit retainer counterclockwise to
remove it.
Remove the fuel unit.
INSPECTION
Remove the fuel unit.
Measure the resistance between the fuel unit
wire terminals with the float at upper and lower
positions.
Wire Terminals
G Y/W
G L/W
Y/W L/W
FUEL GAUGE INSPECTION
Connect the fuel unit wire connectors and turn
the ignition switch "ON".
Check the fuel gauge needle for correct
indication by moving the fuel unit float up and
down.
Float Position
Upper
Lower
Upper Lower
33Ω 686Ω
566Ω 53Ω
600Ω 600Ω
Needle Position
"F" (Full)
"E" (Empty)
ZX / SCOUT
50
Fuel Unit
Fuel Unit Wire
Y/W G
L/W
16-2