Damping Device; Power Drive System - KYMCO ZX Service Manual

3
. INSPECTION/ADJUSTMENT
Rear Wheel
Axle Nut

DAMPING DEVICE

SHOCK ABSORBERS
«Oil Leak/Damage»
Fully apply the front brake and check the
action of the front shock absorber by
compressing it several times.
Check the entire shock absorber assembly for
looseness or damage.
Check the action of the rear shock absorber
by compressing it several times.
Check the entire shock absorber assembly for
looseness or damage.

POWER DRIVE SYSTEM

TRANSMISSION CASE
Check the rear wheel transmission case
surrounding area for oil leaks.
Stop the engine and remove the oil check bolt.
*
Place the motorcycle on its main stand on
level ground.
The gear oil level shall be at the oil check bolt
hole. If the oil level is low, add the specified
oil to the proper level.
Axle Nut
Specified Gear Oil: SAE10W90#
Install and tighten the oil check bolt.
Torque: 1.0 1.5kg-m
Start the engine and check for oil leaks.
3-6