3
. INSPECTION/ADJUSTMENT
Abnormal
Conditions
Check if the abnormal
Happened Last
conditions occur again
Time
Lubrication points
Remove carbon deposits on
Others
combustion chamber,
breather hole and exhaust
muffler
BRAKE DRUM/SHOE
«Brake Shoe Wear»
Replace the brake shoes if the arrow on the
brake arm aligns with reference mark"" on the
brake panel when the brake is fully applied.
«Brake Drum Wear/Damage»
Check the brake drum appearance for damage.
Check if the brake lining wear is within the
specified service limit. Check the brake
operation for abnormal noise and brake drum
inside for wear or damage.
BRAKE DISK/LINING
«Brake Disk Surface and Brake Pad
Wear»
Check the brake disk surface for scratch.
Check if the brake pad wear is within the
specified service limit.
«Brake Disk Runout Inspection»
Jack the motorcycle wheels off the ground and
check if the brake disk runout is within the
specified service limit.
BRAKE FLUID LEVEL INSPECTION
«Brake Master Cylinder Fluid Level
Inspection»
Turn the steering handlebar upright and check
if the front brake fluid level is within the
specified limits through the front brake master
cylinder check hole.
" " Marks
Adjusting Nuts
ZX /SCOUT 50
<Rear>
<Front>
3-4