6
. CYLINDER HEAD/CYLINDER/PISTON
CYLINDER HEAD
REMOVAL
Remove the rear carrier.
Remove the frame body cover. ( ð 12-5)
Remove the spark plug cap.
Remove the three bolts attaching the fan cover
to remove the fan cover.
Remove the two joint lock nuts on the front of
the exhaust muffler and then remove the two
exhaust muffler lock bolts.
Remove the bolt attaching the engine hood to
remove the engine hood.
The installation sequence is the reverse of
removal.
*
When installing the exhaust muffler, first
tighten the two nuts on the front and then
tighten the two bolts.
Remove the spark plug.
Remove the cylinder head bolts and the
cylinder head.
*
Loosen the bolts diagonally in 2 or 3 times.
Remove the cylinder head gasket.
6-3
Spark Plug Cap
Fan Cover/Engine Hood
Bolts
Cylinder head Bolts
Cylinder Head
COMBUSTION CHAMBER
ZX / SCOUT
Spark Plug