Steering Handlebar - KYMCO ZX Service Manual

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK

STEERING HANDLEBAR

REMOVAL
Remove the handlebar front and rear covers.
( ð 12-3)
Remove two bolts attaching the left brake lever
holder.
Remove two bolts attaching the brake master
cylinder (disk brake) to the right brake lever.
Remove the two right handlebar switch housing
bolts and separate the housing.
Disconnect the throttle cable and then remove
the throttle pipe from the handlebar.
Remove the handlebar lock nut to remove the
handlebar.
13-3
Brake Master Cylinder
Bolts
Bolts
Handlebar
INSTALLATION
ZX / SCOUT
Bolts
Throttle Cable
Throttle Pipe