KYMCO ZX Service Manual page 54

5
. ENGINE REMOVAL/INSTALLATION
Remove the rear brake adjusting nut and
disconnect the brake cable from the
crankcase.
Remove the rear brake cable clamp and rear
brake cable.
Remove the cooling air tube band on the left
crankcase cover and disconnect the cooling air
tube.
Remove the rear shock absorber lower mount
bolt.
Remove the right and left engine mounting nuts.
Take out the right and left engine mounting
bolts.
Lift the frame upward to separate it from the
engine and be careful not to damage the rear
fender.
ENGINE HANGER BRACKET REMOVAL
Remove the engine hanger bracket bolt and
engine hanger bracket.
The installation sequence is the reserve of
removal.
Torque: 3.5 4.5kg-m
Rear Shock Absorber Lower Mount Bolt
5-3
Clamp
Engine Mounting Nuts
Engine Hanger Bracket Bolt
ENGINE HANGER BRACKET
INSPECTION
ZX / SCOUT
Rear Brake Cable