7
. A.C. GENERATOR
Clean the taper hole in the flywheel off any
burrs and dirt.
Install the woodruff key in the crankshaft
keyway.
Install the flywheel onto the crankshaft with the
flywheel groove aligned with the crankshaft
woodruff key.
Hold the flywheel with the universal holder and
install the flywheel flange nut.
Torque: 3.5 4.0kg-m
Start the engine and check the ignition timing.
( ð 3-7)
Install other removed parts in the reserve order
of removal.
A.C. Generator Wire Connector
7-5
ZX / SCOUT
Woodruff Key
Universal Holder