Oil Pump Bleeding - KYMCO ZX Service Manual

4
. LUBRICATION SYSTEM
*
• Lubricate the O-ring with grease or
engine oil before installation.
• Make sure that the oil pump is inserted
into the crankcase.
• Apply molybdenum disulfide or grease to
the pump pinion.
Install the oil pump onto the crankcase.
Install the oil pump control cable plate.
Connect the oil inlet line and oil outlet line
properly.
Connect the oil pump control cable.
Bleed air from the oil pump.
Grease or Engine Oil

OIL PUMP BLEEDING

ZX /SCOUT 50
Oil Outlet Line
Control Cable
4-4