KYMCO ZX Service Manual page 7

2
. GENERAL INFORMATION
to the specified capacity.
n After operation, terminal caps shall be installed
securely.
n When taking out the connector, the lock on
the connector shall be released before
operation.
n Hold the connector body when connecting or
disconnecting it.
n Do not pull the connector wire.
n Check if any connector terminal is bending,
protruding or loose.
n The connector shall be inserted completely.
2-3
Easy confirm
n If the double connector has a lock, lock it
at the correct position.
n Check if there is any loose wire.
n Before connecting a terminal, check for
damaged terminal cover or loose negative
terminal.
n Check the double connector cover for proper
coverage and installation.
n Insert the terminal completely.
n Check the terminal cover for proper coverage.
n Do not make the terminal cover opening face
up.
n Secure wire harnesses to the frame with their
respective wire bands at the designated
locations.
Tighten the bands so that only the insulated
surfaces contact the wire harnesses.
n After clamping, check each wire to make sure
it is secure.
ZX / SCOUT