KYMCO ZX Service Manual page 60

6
. CYLINDER HEAD/CYLINDER/PISTON
DECABONIZING
Remove the carbon deposits from the
combustion chamber
*
Avoid damaging the combustion cham-ber
wall and cylinder mating surface.
CYLINDER HEAD INSPECTION
Check the cylinder head for warpage with a
straight edge and feeler gauge.
Service Limit:
0.10mm replace if over
CYLINDER HEAD INSTALLATION
Install the cylinder head on the cylinder
properly.
*
Be careful not to damage the mating
surfaces.
Install a new cylinder head gasket onto the
cylinder.
Combustion Chamber
ZX / SCOUT
Mating Surface
Cylinder head Gasket
6-4