KYMCO ZX Service Manual page 80

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Measure the drive belt width.
Service Limit:
16.5mm replace if below
*
Use specified genuine parts for
replace-ment.
REPLACEMENT
Remove the nine left crankcase cover bolts
and left crankcase cover. ( ð 8-3)
Hold the clutch outer with the universal holder
and remove the 14mm clutch outer nut and
clutch outer.
Hold the drive pulley with the holder and
remove the drive face nut.
Remove the starting ratchet.
Remove the drive pulley face.
8-7
Clutch Outer Clutch Outer Nut
Ratchet Drive Face
Remove the drive belt from the clutch/ driven
pulley.
ZX / SCOUT
Drive Face Nut