Drive Belt - KYMCO ZX Service Manual

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
LEFT CRANKCASE COVER
INSTALLATION
First install the dowel pins and then the seal
rubber.
Install the left crankcase cover and tighten the
nine bolts diagonally.
Connect the drive belt cooling air tube and
install the circlip.
*
For drum brake, note the location of the
brake cable clamp and install the rear
brake cable in place with the clamp.
Washer
Dowel Pins

DRIVE BELT

Remove the left crankcase cover.
INSPECTION
Check the drive belt for cracks, separation or
abnormal or excessive wear.
ZX / SCOUT
Circlip
Left Crankcase Cover
8-6