Damping Device; Shock Absorbers; Power Drive System; Transmission Case - KYMCO SUPER8 50 2T Service Manual

3
. INSPECTION/ADJUSTMENT

DAMPING DEVICE

SHOCK ABSORBERS

《Oil Leak/Damage》
Fully apply the front brake and check the
action of the front shock absorber by
compressing it several times.
Check the entire shock absorber assembly
for looseness or damage.
Check the action of the rear shock absorber
by compressing it several times.
Check the entire shock absorber assembly
for looseness or damage.

POWER DRIVE SYSTEM

TRANSMISSION CASE

Check the rear wheel transmission case
surrounding area for oil leaks.
Stop the engine and remove the oil check
bolt.
＊
Place the motorcycle on its main stand
on level ground.
The gear oil level shall be at the oil check
bolt hole. If the oil level is low, add the
specified oil to the proper level.
Specified Gear Oil: SAE 90#
Install and tighten the oil check bolt.
Torque: 1.0～1.5kg-m
Start the engine and check for oil leaks.
3-7
SUPER8 50 2T
Oil Check Bolt