Setting The Character Pitch For Courier/Letter Gothic - Kyocera FS FS-1920 Operation Manual

Pagination

Setting the Character Pitch for Courier/Letter Gothic

The character pitch for fixed fonts is adjustable when the default font is
Courier or Letter Gothic.
1
Press the MENU key.
2
Press the or
Font
3
Press the > key.
4
Press the or
>Font Select
Internal
5
Check that Internal is displayed and press the > key.
6
Press the or
>>Pitch
10.00 cpi
7
Press the ENTER key. A blinking cursor ( _ ) appears.
>Pitch
10.00 cpi
8
Press the or
where the cursor is blinking. The character pitch can be set between
0.44 and 99.99 characters per inch, in 0.01 character-per-inch
increments. You can use the > or < keys to move the cursor right and
left.
9
When the desired size is displayed, press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
key repeatedly until Font > appears.
>
key repeatedly until >Font Select > appears.
>
key repeatedly until >>Pitch appears.
key to increase or decrease the value of the figure
1-48